ServiCover📌 Key Takeaway: Fiber cement siding averages about $12.50 per sq ft installed. A 1,500 sq ft wall area typically runs around $18,000; 2,000 sq ft around $21,000.
Fiber Cement Cost by Wall Area
| Siding Area | Typical Cost |
|---|---|
| 800 sq ft | $13,000 |
| 1,000 sq ft | $15,000 |
| 1,500 sq ft | $18,200 |
| 2,000 sq ft | $21,300 |
| 3,000 sq ft | $25,000 |
Vinyl by Grade (2,000 sq ft)
| Grade | Typical Cost |
|---|---|
| Low-end | $6,000-$10,000 |
| Mid-grade | $12,000-$16,000 |
| Premium | $18,000-$24,000 |
What Adds to the Bill
- Old siding removal: $1,000-$3,000
- Rot repair: $100-$2,000
- Mold remediation: $20-$30 per sq ft where found
- Multiple stories, steep grades and complex trim
- Painting fiber cement if not pre-finished
🏠 Looking for a siding contractor near you?
Check free quotes from local, pre-screened siding contractors — 100% free, no obligation.
Get Free Quotes →Frequently Asked Questions
Is siding measured by house size or wall area?
Contractors measure the wall area to be covered, which is different from your home's living square footage.
Does siding cost vary by state?
Yes — labor rates differ widely. High-cost areas such as California and New York typically run higher.
🔎 How we research: The ServiCover Editorial Team compiles prices and guidance from published 2026 cost guides, manufacturer information and industry sources. Prices are national ranges and vary by location, home and provider, so always compare written quotes. We don't perform the work ourselves, and we may earn a commission when you request quotes through our partners — see our Advertiser Disclosure.